SKU:

JFIND JF02 1000W 12V to 220V Pure Sine Wave Power Inverter, Universal Plug
JFIND JF02 1000W 12V转220V纯正弦波逆变器 万能插
条码：6922994235418
HSCode：85444219
批量修改原始型号 		采购：Felix  编辑：Shadow  产品经理：caifeng

Use Required Reading
1. This machine has no reverse connection function, battery positive and negative lines can not be connected back, otherwise it will damage the inverter.
2. There are four 16-square models for the use of two red and two together, two black and in, together. You can not use one alone. Otherwise the current is not enough to carry the high power.
3. When the INVERTER is not in use, please turn off the inverter switch, so as not to affect the life of the internal components, loss of battery power.
4. 12V high voltage protection voltage is 15V, 24V high voltage protection voltage is 29V, 48V high voltage protection voltage is 57V. Do not exceed the voltage, or the inverter will be high-voltage protection, do not work.
5. If you want to extend the lead between the battery inverter to be thickened.
6. Battery is how many volts must use how many volts inverter.
7. The larger the battery number, the greater the power used. The power of the battery is small.
8. Smart Fan has 2 boot modes
1) The inslde temperature reaches 45 intelligent fan starts.
2) If high power is used, the intelligent fan turns straight and the low power does not turn.

Preface
First of all, thank you for choosing our pure sine wave inverter products. All our products have been through strict production control and quality control and accurate testing and certification,all factory products meet the national standards. Users can buy and use! Thank you for buying our products again!
Matters needing attention
1. The installation and commissioning of the equipment shall be carried out by professional electrical maintenance personnel familiar with the struct-ure and operation hazards of the device.
2. Failure to comply with this precaution may cause physical injury.
3. Do not connect this equipment to the civil power distribution box, such as home lines.
4. The inverter should be away from water, avoid water droplets on the mac-hine or gradually above, do not use wet hand plug or unplug.
5. If the inverter is in a cool environment, the appropriate temperature should be -20degrees Celsius ~ 50 degrees Celsius, avoiding direct sunlight and hot air vents.
6. Inverters should be kept away from flammable substances, or where flam-mable gases are accumulated.
7. After long-term use, the inverter will heat, so avoid close to the heat-sensitive substances.
8. Ensure smooth ventilation and good heat dissipation.
9. High pressure danger, please do not open this machine.
10. Use the right type of wire to avoid fuse because of excessive inverter current.
11. Make sure the inverter connects the correct battery, otherwise it will fuse the fuse of the inverter. Turn off the switch when the machine is not in use.
12. Please turn off the switch and clean with a dry cloth before cleaning.Do not use wet cloth or cleaning agent.

Product Characteristics
The inverter adopts the SPWM technology of MCU micro-processing control, pure sine wave output and pure waveform. The unique dyna -mic current loop control technology ensures the reliable operation of the inverter. Strong load adaptability, including inductive load, capacitive load, resistive load, mixed load. Strong overload and impact resistance. With input overvoltage, undervoltage, overload, overheating, output short circuit and other perfect protection functions. Sinusoidal inverter adopts LCD liquid crystal display mode, the state is clear at a glance. Stable performance, safe and reliable, long service life.

Product Application
1. Power tools: Disk saw, drill, grinder, grinder, buffer, weeding machine and trimmer, air compressor
2. Home entertainment electronics: Television, cassette recorders, video game consoles, audio, musical instruments, satellite equipment
3. Industrial equipment: Cloud server, face recognition server, intelligent manufacturing robot, emergency system
4. Household appliances: Vacuum cleaners, fans, fluorescent lamps and incandescent lamps, razors, sewing machines
5. Office equipment: Computers, printers, monitors, fax machines, scanners, Kitchen appliances: Coffee maker, blender, ice marker, toaster

Protective Function
1. Low pressure alarm: buzzer with 1 Hz clearance 2 sound alarm.
2. Low pressure protection: buzzer with 1 Hz clearance 3 sound continuous alarn
3. Overpressure protection: buzzer with 1 Hz clearance 4 alarm.
4. Overheat protection :80+/-5, overheat protection buzzer 1 Hz gap 5 alarm.
5. Overload protection: overload protection 10S automatic turn off output5S automatic recovery, three consecutive automatic lock.
6. Short circuit protection: Output Short Circuit Protection 1s shutdown lock.

Installation Requirements
Inverter installation with reference to local power requirements, the installation site must be dry, clean and well ventilated.
1. Working temperature: -30 degree C to 40 degree C
2. Storage conditions: -10 degree C to 50 degree C
3. Relative humidity: 0-95%, no condensation
4. Cooling: Forced ventilation

FAQs and Solutions
1. Outside interference: The inverter may be disturbed by some strong electromagnetic waves in use, such as nearby motors, power converters, strong magnetic fields, etc.
2. The inverter has no reaction:
1) The battery and inverter are not connected and reconnected.
2) The pole of the battery is reversed and the fuse is fused. Replace fuse.
3. Low output voltage
1) Overload, load current exceeds nominal current, turn off partial load and restart.
2) The input voltage is too low. Ensure that the input voltage is within the nominal voltage range.
4. Low Voltage Alarm
1) The battery is dead and needs to be charged.
2) Battery voltage is too low or poor contact, recharge, check battery terminals or clean terminals with dry cloth.
5. Inverter without output
1) Battery voltage is too low, recharge or replace battery.
2) The load current is too high, turn off part of the load and restart the inverter.
3) Inverter overtemperature protection. Let the inverter cool down for a while and put it in a ventilated place.
4) The inverter failed to start and restarted.
5) Terminal connection, fuse, replace fuse.
6. The inverter does not work: Check the power switch, fuse and battery connection or smoke.


使用必读
1. 本机无反接功能，电池正负极线不能反接，否则会损坏逆变器。
2. 有四种16方型号可供使用，两红两并，两黑并中，并用。 你不能单独使用一个。 否则电流不足以承载大功率。
3. 逆变器不使用时，请关闭逆变器开关，以免影响内部元件寿命，损失电池电量。
4. 12V高压保护电压为15V，24V高压保护电压为29V，48V高压保护电压为57V。 请勿超过电压，否则逆变器将高压保护，不工作。
5. 如果要延长蓄电池逆变器之间的引线要加粗。
6. 电池是多少伏就必须使用多少伏的逆变器。
7. 电池数量越大，使用电量越大。 电池的功率较小。
8. 智能风扇有2种启动模式
1) 机内温度达到45℃智能风扇启动。
2）如果使用大功率，智能风扇直转，小功率不转。

前言
首先感谢您选择我们的纯正弦波逆变器产品。 我们所有的产品都经过严格的生产控制和质量控制以及准确的检测和认证，所有出厂产品均符合国家标准。 用户可以购买并使用！ 感谢您再次购买我们的产品！
注意事项
1. 设备的安装、调试应由熟悉设备结构和操作危险的专业电气维修人员进行。
2. 不遵守此注意事项可能会导致人身伤害。
3. 请勿将本设备连接至民用配电箱，例如家庭线路。
4. 逆变器应远离水源，避免水滴在机器上或逐渐上方，请勿用湿手插拔。
5. 如果逆变器处于阴凉环境，适宜温度为-20摄氏度~50摄氏度，避免阳光直射和热风口。
6. 逆变器应远离易燃物质或有易燃气体聚集的地方。
7. 长期使用后，逆变器会发热，因此应避免靠近热敏物质。
8. 保证通风顺畅、散热良好。
9. 高压危险，请勿打开本机。
10. 使用正确类型的电线，避免因逆变器电流过大而熔断。
11. 确保逆变器连接正确的电池，否则会熔断逆变器的保险丝。 机器不使用时请关闭开关。
12. 清洁前请关闭开关并用干布清洁。请勿使用湿布或清洁剂。

产品特点
逆变器采用MCU微处理控制的SPWM技术，纯正弦波输出，波形纯正。 独特的动态电流环控制技术，保证了逆变器的可靠运行。 负载适应性强，包括感性负载、容性负载、阻性负载、混合负载。 抗过载、抗冲击能力强。 具有输入过压、欠压、过载、过热、输出短路等完善的保护功能。 正弦逆变器采用LCD液晶显示方式，状态一目了然。 性能稳定、安全可靠、使用寿命长。

产品应用
1. 电动工具：盘锯、钻头、磨床、研磨机、缓冲器、除草机和修剪机、空气压缩机
2. 家庭娱乐电子产品：电视、盒式录音机、视频游戏机、音响、乐器、卫星设备
3. 工业设备：云服务器、人脸识别服务器、智能制造机器人、应急系统
4. 家用电器：吸尘器、风扇、荧光灯和白炽灯、剃须刀、缝纫机
5. 办公设备：电脑、打印机、显示器、传真机、扫描仪、厨房电器：咖啡机、搅拌机、制冰机、烤面包机

保护功能
1. 低压报警：蜂鸣器以1Hz清2声报警。
2. 低压保护：蜂鸣器1Hz清零3声连续报警
3. 超压保护：蜂鸣器以1Hz清4级报警。
4. 过热保护：80+/-5，过热保护蜂鸣器1赫兹间隙5报警。
5. 过载保护：过载保护10S自动关闭输出5S自动恢复，连续3次自动锁定。
6. 短路保护：输出短路保护1s关机锁定。

安装要求
逆变器安装参照当地电力要求，安装场地必须干燥、清洁、通风良好。
1. 工作温度：-30℃至40℃
2. 储存条件：-10℃至50℃
3. 相对湿度：0-95%，无凝露
4. 冷却方式：强制通风

常见问题及解决方案
1. 外界干扰：逆变器在使用过程中可能会受到一些强电磁波的干扰，如附近的电机、电源转换器、强磁场等。
2. 逆变器无反应：
1）电池与逆变器未连接并重新连接。
2）电池极性接反，保险丝熔断。 更换保险丝。
3. 输出电压低
1）过载，负载电流超过标称电流，关闭部分负载并重新启动。
2) 输入电压过低。 确保输入电压在标称电压范围内。
4. 低电压报警
1）电池没电了，需要充电。
2）电池电压过低或接触不良，请重新充电，检查电池端子或用干布清洁端子。
5、逆变器无输出
1) 电池电压过低，重新充电或更换电池。
2）负载电流过高，关闭部分负载，然后重新启动逆变器。
3）逆变器过温保护。 让逆变器冷却一段时间，然后放在通风处。
4) 逆变器无法启动并重新启动。
5) 端子连接、保险丝、更换保险丝。
6. 逆变器不工作：检查电源开关、保险丝及电池连接是否冒烟。


代码：

Specification:
Package weight
One package Weight 1.6kgs / 3.53lb
One Package Size 32.0cm * 20.0cm * 8.0cm / 12.6inch * 7.87inch * 3.15inch
Qty per Carton 10
Carton Weight 17kgs / 37.48lb
Carton Size 42cm * 42cm * 32cm / 16.54inch * 16.54inch * 12.6inch

代码：