null 查看产品详细信息 产品型号: 侵权图库
提醒 2:该产品涉及专利问题,不能在Alibaba上发布!
型号:EDA004530301A     大类别:In Car     第2级类别:Diagnostic Scan Tools  -->子类别:Electronic Test   审核产品   所有审核和提问(new)  链接英文名称:JFIND JF109 Car Double Hole Spark Plug Tester(US Plug)
中文名称:JFIND JF109 汽车双孔火花塞测试仪(美规)
颜色:US Plug
包装:Plastic Bag
配件:
装箱资料:
每箱:30pcs
重量:11kgs
外箱尺寸:42cm * 32cm * 26cm
采购:Felix  编辑:Ellie(2023-04-25)  美工:Ellie
         
Feature:
1. It has two testing holes, you can test two spark plugs meanwhile and and if you suspect any spark plug works improperly you could compare and test to make accurate judgment.
2. Adjustable double hole car spark plug tester detector ignition plug analyzer diagnostic tool.
3. Usage: test spark plug performance and ignition strength
4. Application range: 12V Gasoline vehicles car spark plugs
5. Widely application: 100V-240V input voltage .
6. Test principle: In automobile ignition system, the high-voltage ignition coil generates a high-voltage (10000 volts or more), and the spark plug diverts it form high -tension ignition coil into the cylinder engine, spark between the spark plug electrodes will ignite the mixture. The JF109 could tell the good spark plugs from the bad by the strength of the spark.

Using Note:
1. Please Turn Off Power before you place spark plug
2. The Spark Plug Tester is a high-voltage detector, so do not touch spark plug with hand at work to avoid danger.

User Manual:
1. Place the Spark Plug into tester hole 1 or 2; If you want to compare the new spark plug and old one, place new spark plug into hole 1 and the old on into hole 2
2. Connect to power supply
3. Turn the key switch 4 clockwise to turn on tester, indicator 3 will light up, tester is now working at 1000rpm/min.
4. Again turn the key switch 4 clockwise,you can adjust the working frequency between 1000rpm to 6000rpm/min.The higher the frequency, the stronger the spark strength.


中文描述:
特征:
1. 它有两个测试孔,可以同时测试两个火花塞,如果怀疑哪个火花塞工作不正常,可以通过对比测试做出准确判断。
2. 可调式双孔汽车火花塞测试仪检测仪火花塞分析仪诊断工具。
3. 用途:测试火花塞性能和点火强度
4. 应用范围:12V汽油车汽车火花塞
5. 应用广泛:100V-240V输入电压。
6. 测试原理:在汽车点火系统中,高压点火线圈产生高压(10000伏以上),火花塞将高压点火线圈导引到气缸内,火花塞之间产生火花 电极会点燃混合物。 JF109 可以根据火花的强弱来判断火花塞的好坏。

使用注意事项:
1. 放置火花塞前请关闭电源
2. 火花塞测试仪为高压检测仪,工作时请勿用手接触火花塞,以免发生危险。

用户手册:
1. 将火花塞放入测试孔 1 或 2; 如果要比较新旧火花塞,请将新火花塞放入孔 1,将旧火花塞放入孔 2
2. 连接电源
3. 顺时针转动钥匙开关4 启动测试仪,指示灯3 亮,此时测试仪以1000rpm/min 的速度工作。
4. 再次顺时针转动钥匙开关4,可以在1000rpm到6000rpm/min之间调整工作频率。频率越高,火花强度越强。



搜索关键词:Spark Plug Tester, Detector Ignition Analyzer, Motorcycle Detector